Welcome to GTA5-Mods.com

@Franky_47 I never teleport to the Aircraft Carrier because what's the fun in that. I prefer flying over there and practicing my landing skills on the aircraft carrier. Anyways, the problem I had has been solved. It was two mods relating to the carrier, that were conflicting with each other. I can only use one or the other but not both, apparently.

@HKH191 I looked into it and it turns out I did have two different mods that modifies the carrier, one was an old one I forgot about which is basically an xml from here > https://www.gta5-mods.com/maps/aircraft-carrier and the other one was a recent one I also installed which creates scenarios around the carrier and works well with EAI, which is this one > https://www.gta5-mods.com/misc/aircraft-carrier-scenarios , so basically it seems as if there was a conflict going on between the two, causing texture issues and missing props, so I pulled the xml one out and voilà, now the aircraft carrier's texture issues are gone, even with the EAI files installed. I can probably use either one or the other but not both, unfortunately.

@HKH191 Unfortunately I gotta bring this issue to your attention again because basically it's never been fixed, regardless of how many times EAI has been updated since I messaged you back in September 27, 2023. I'm still experiencing the same texture issue, going back to version 19. The Aircraft Carrier, for some reason, is missing a whole bunch of parts halfway, going up the stairs, and it only happens when I install the EAI files, as you can see here > https://vimeo.com/868921192 . Once I pull the files out then the carrier becomes normal again. You did responded back to me on that back on September 30, 2023 and you said you've seen that issue before and looking into it. So, as of today, what do you think is causing that problem?, if you know.

@sjaak327 I don't know what's causing this but, for some reason, saving "EnableSnow", to the surface, doesn't retain in the ini file, when I manually save that option while in game play.

You updated simple trainer to the v15.6, which allows snow on the surface again, which is great, and snow does shows up on the ground once I click on that option in the menu but, for some reason when I save it to the ini, via pressing NumPad 5, and exit the game once I go back in the game there is no snow on the ground, I have to repeat the process over again by enabling snow on the ground in the menu, even after I already saved it to the ini previously....so, what's causing that issue and how it can be fixed?

here's a pic showing that "EnableSnow" is enabled in the ini....so I don't know what causes the game to forfeit that already saved entry when I relaunch the game. > https://imgur.com/a/Q4HvmH4

@Darthspaans95 The memory address/global variables were changed in the v3095 patch, that's why it gives you that error. All trainer scripts need to be updated for the latest patch. Rampage Trainer ( https://www.gta5-mods.com/scripts/rampage-trainer ) is the only trainer updated for the latest patch that has an option to enable the snow on the ground and won't give you an error with the SingleplayerXmas.asi file installed. ENT was also updated for the v3095 but I don't know if it has the option to add snow to the surface. If you don't like Rampage trainer, Simple Trainer will be updated very soon, I already contacted sjaak327 ( https://www.gta5-mods.com/scripts/simple-trainer-for-gtav#comments_tab ), once simple trainer gets updated it will have the ability to add snow to the ground again. As far as Menyoo, I don't know when it will be updated.

@stevewalpole10 The memory address/global variables were changed in the v3095 patch, that's why it gives you that error. All trainer scripts need to be updated for the latest patch. Rampage Trainer ( https://www.gta5-mods.com/scripts/rampage-trainer ) is the only trainer updated for the latest patch that has an option to enable the snow on the ground and won't give you an error with the SingleplayerXmas.asi file installed. ENT was also updated for the v3095 but I don't know if it has the option to add snow to the surface. If you don't like Rampage trainer, Simple Trainer will be updated very soon, I already contacted sjaak327 ( https://www.gta5-mods.com/scripts/simple-trainer-for-gtav#comments_tab ), once simple trainer gets updated it will have the ability to add snow to the ground again. As far as Menyoo, I don't know when it will be updated.

@Alex106 Let me ask you something, the content.xml in the "mpSecurity Fix" folder, is that still necessary even for the new v3095? What exactly does it fix when you swap it?

@HKH191 I don't know if you can make this happen or not, I'm just bringing this to your attention.....for as long as I've played gta5 I've noticed that certain doors specifically within Michael's and Franklin's houses for some reason cannot be opened and I wonder, with your expertise, if you can make these doors open. At Franklin's house, the door outside his bedroom, to the left, is always locked....it's got a whole bunch of green tubs in front of it and that door can't never be opened, it would be nice to be able to exit thru that door, to go outside, instead of going up the stairs and around the living room to the upper deck, in order to be able to outside. Here's a little demo video showing you what door specifically I'm talking about > https://vimeo.com/899401450?share=copy

In Michael's house, as soon as you go up the stairs, the door immediately to the left, across Tracey's bedroom, there's a door there that can't never be opened, that's another door that maybe you can modify to open unless is a "dummy" door leading to nowhere, here's the demo for that so you can see what door I'm talking about > https://vimeo.com/899401950?share=copy

What's your opinion on that and is there anything that you can do about that?

@sjaak327 I think this trainer has to be updated specifically for the newer v3095 patch because I'm unable to add snow on the surface. I am able to trigger falling snow but can't add snow to the ground, I keep getting an error saying that adding snow to the surface is not compatible with the patch. I have a mod installed from Alex106 "SP Festive Surprise", which is a mod that adds some Christmas themed content in single player however once I installed it I noticed that I was not able to add snow to the ground via "Simple Trainer" or "Menyoo" which is very crucial, otherwise what's the point of "Xmas" mods if there is no snow on the ground so I messaged him about that and he said that memory address/global variables are different for every patch and that the reason I'm getting that error is because some trainer scripts like yours and Menyoo have to be updated for the latest patch. The "Rampage" Trainer was updated for the v3095, I installed it and I was able to add snow to the surface but, I don't like nor use that trainer. ENT was also updated for the latest v3095 but it doesn't have the option to add snow to the ground so I assume Simple Trainer (and Menyoo) also has to be updated for the latest patch in order to trigger that feature in game.

@Bob_74 For some reason is not working with the latest v3095 patch. Everything was installed correctly....iFruitAddon2 folder, iFruitAddon2.dll, NoMoreShortcuts folder, NoMoreShortcuts.dll, SharpDX.dll, SharpDX.XInput.dll, spoutfit_config.ini and SPOutfits.dll...all those files are in the 'scripts' folder, as they should, and the InputSimulator.asi is installed in the main directory but, when I went in the game the contact DOES NOT show up on the phone and that sucks because without this mod I can't load the saved outfits I got for all the characters. I don't know if this mod has to be updated for the current patch or not but, if you have any idea as to why I can't see the contact when I pull the phone in game please let me know. This mod is crucial! Btw, the contact icon I chose for the xml is the "WEB_BENEFACTOR".